Browse our complete range of construction pipes, plumbing materials, drainage solutions and accessories. Every product category is stocked in depth and ready for next-day delivery across the UK.
8
Product Categories
5,000+
Products in Stock
50+
Leading Brands
24hr
UK Delivery
Our PVC pipe range covers every domestic and light commercial application. We stock both solvent weld and push-fit systems in white, grey and black, suitable for soil and vent stacks, waste water discharge, overflow connections and general above-ground plumbing installations. All products conform to BS EN 1329-1 and BS EN 1455-1 standards.
Available diameters range from 21.5mm overflow through to 160mm soil pipe. Standard lengths include 1 metre, 2 metre, 3 metre and 4 metre options, with a full complement of matching fittings including bends, branches, couplers, reducers and access points.
Starting from
£3.49
Starting from
£12.99
Medium Density Polyethylene pipe is the UK standard for underground potable water supply. Our blue MDPE range is WRAS approved and compliant with BS EN 12201 for safe drinking water conveyance. We also carry yellow MDPE for below-ground gas installations, manufactured to BS EN 1555 specifications.
Available in coil lengths of 25m, 50m and 100m and in straight 6m lengths for larger diameters. Sizes range from 20mm service connections right up to 63mm distribution mains. Each coil is clearly marked with pipe diameter, pressure class and certification information for easy identification on site.
High Density Polyethylene pipe is engineered for demanding civil engineering, infrastructure and industrial applications. Our HDPE range is manufactured to PE100 grade with SDR ratings from SDR11 (16 bar) through to SDR17 (10 bar), providing exceptional pressure capacity and long-term durability for buried water mains, sewer force mains and industrial process pipework.
HDPE pipe is available in diameters from 25mm up to 630mm, supplied in 6m and 12m straight lengths or in coils for smaller sizes. The material is lightweight compared to ductile iron, resistant to corrosion and ground movement, and can be jointed by electrofusion or butt fusion welding for a fully sealed, leak-free system.
Starting from
£24.99
Starting from
£7.99
Copper pipe remains the preferred choice for UK plumbing and heating installations. We supply half-hard temper (Table X) and soft temper copper pipe in diameters from 8mm microbore up to 54mm, manufactured to BS EN 1057 and suitable for hot and cold water distribution, central heating, gas supply and refrigeration applications.
Our copper pipe is sourced from leading European mills and supplied in 1m, 2m and 3m straight lengths. We also stock chrome-plated copper for exposed pipework installations and degreased copper for medical gas systems. Compatible with compression, solder ring, press-fit and push-fit jointing methods, our copper pipe integrates seamlessly with all major fitting brands.
Steel pipe is the workhorse of industrial and commercial construction. We stock galvanised, mild steel (black) and stainless steel pipes in both medium and heavy grade to BS EN 10255. Galvanised pipe is widely used for above-ground water distribution, fire sprinkler systems, compressed air and structural applications where strength and rigidity are paramount.
Our steel pipe range covers nominal bore sizes from 15mm (half inch) to 150mm (six inch), supplied in standard 3m and 6m lengths. Threaded, plain end and grooved options are available. We also hold a range of malleable iron fittings to complement our steel pipe for complete system installations.
Starting from
£18.99
Starting from
£8.99
Our drainage pipe range encompasses everything needed for foul water, surface water and land drainage installations. We stock single wall and twin wall (structured wall) pipes in the distinctive terracotta orange colour used for below-ground foul drainage, as well as black twin wall pipes for surface water systems. All products conform to BS EN 1401 and BS EN 13476 standards.
Diameter options include 110mm, 160mm, 225mm and 300mm, in standard 3m and 6m lengths. Ring stiffness classes of SN4 and SN8 are available to suit varying burial depths and loading conditions. We also carry a full range of matching drainage fittings, inspection chambers, manhole risers and gullies to complete your installation.
A pipe system is only as reliable as its connections. Our fittings and valves range covers compression fittings, solder ring capillary fittings, push-fit speedfit connectors, press-fit systems, solvent weld fittings, MDPE compression fittings and electrofusion couplers. Every fitting we sell is manufactured to the relevant British or European standard.
We stock brass, copper, plastic and stainless steel fittings in configurations including elbows, tees, reducers, couplers, adaptors, end caps, tank connectors and manifolds. Our valve selection includes gate valves, ball valves, check valves, pressure reducing valves, isolation valves and thermostatic mixing valves for both domestic and commercial applications.
Starting from
£0.89
Starting from
£0.49
Complete your installation with our comprehensive accessories range. We stock everything from PTFE tape and jointing compound to pipe clips, brackets, hangers and supports. Our pipe insulation selection covers both domestic and commercial requirements with foam, mineral wool and pre-formed lagging sections in all common pipe sizes.
You will also find soldering and brazing supplies, flux, cleaning agents, pipe cutters, bending springs and deburring tools. For testing and commissioning, we stock pressure gauges, test plugs and system cleaners. Every accessory we carry is chosen for quality and reliability to match the standards of our pipe and fittings range.
A quick reference for common pipe materials, sizes and applications. For detailed technical data sheets, contact our team.
| Material | Typical Diameters | Pressure Rating | Standard Lengths | Common Uses |
|---|---|---|---|---|
| PVC-U | 32mm, 40mm, 50mm, 110mm, 160mm | Up to 6 bar (soil) | 1m, 2m, 3m, 4m | Soil & vent, waste, overflow |
| MDPE | 20mm, 25mm, 32mm, 50mm, 63mm | 12.5 bar (PN12.5) | 25m, 50m, 100m coils | Underground water supply |
| HDPE | 25mm – 630mm+ | SDR11 – SDR17 (10 – 16 bar) | 6m, 12m lengths; coils | Mains water, gas, industrial |
| Copper | 8mm, 10mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm | Up to 50 bar | 1m, 2m, 3m lengths | Hot & cold plumbing, heating |
| Steel (Galv.) | 15mm – 150mm NB | Up to 25 bar (Sch 40) | 3m, 6m lengths | Industrial, structural, fire mains |
| Drainage | 110mm, 160mm, 225mm, 300mm | SN4 / SN8 ring stiffness | 3m, 6m lengths | Foul & surface water drainage |
Our technical team has decades of combined experience in the construction and plumbing industries. Whether you need guidance on material selection, pressure ratings or system compatibility, we are here to help.
All pipes and fittings are for construction, plumbing and drainage use. Please check local building regulations and product specifications before purchase. Prices include VAT where applicable.